PROLUBE COPPER

Features:

Wide range of operating temperatures: due to the content of ultrathin copper particles, it retains all its parameters in a wide range of temperatures from -30 ° C to + 1000 ° C.

Mechanical stability and water proof: not flushed with water even at low temperatures.

Provides anticorrosion resistance: due to the content of corrosion inhibitors, it protects the surface from corrosion.

Prevents blocking, baking and acidification: it works efficiently even under harsh industrial conditions, prevents blocking, baking and lubrication of mechanisms.

Conducts electric current: due to the content of its composition, a sufficient amount of copper can be used where the demand is electric conductivity.

High mechanical strength: retains its excellent lubricating properties, even in hard industrial conditions, which prevents seizure and blocking of parts of the mechanisms and their deformation due to the appearance of high loads (pressures).

Application / method of use

PROLUBE COPPER is intended mainly for use in those industries where active work is required under extreme conditions, mainly at high temperatures.

Intended, in the first place, for lubrication:

- large joints and flanges;

- bolts, nuts and connections of inspection openings in boilers or boilers;

- screws, bolts, nuts and joints on chains of conveyors of furnaces;

- Injectors in cylinder heads of diesel engines, screws and joints;

- drill rods.

Can be used in all cases where there is a high operating temperature and aggressive corrosive environment, which can cause blockage, jamming and irreversible deformation of the mechanical parts of the device.

PROLUBE COPPER meets the ISO 9001 standard.

Active Ingredients:

- microplate copper

- refined mineral oil

- Extreme pressure and antioxidant additives

ATTENTION: In case of visual corrosion, it is necessary to pre-clean and degrease the surface to which the lubricant will be applied. You can not use PROLUBE COPPER to lubricate bearings. Use for metals and materials resistant to mineral oils.

PROLUBE DARK

Features:

Wide range of operating temperatures: resistant to high temperatures, due to the used components: up to + 200 ° C, as a lubricant and up to + 700 ° С, as a means of baking.

Maintains its parameters in extreme operating conditions: thanks to an agreed combination of graphite and organometallic compounds, it has a very high resistance to high pressure (pressure), temperature and adverse conditions with a corrosive atmosphere, while giving the effect a very good seal.

Effective in sea transport: it is water-repellent: resistant to water, salt water and sea (salty) fog.

Application / method of use

PROLUBE DARK is intended for use on cylindrical, conical and spiral gears, chain conveyors, adjustable gears, sliding support plates and rollers of belt conveyors, metal ropes and crown wheel bits in cement plants.

It is also used in ports, at shipyards and at sea to lubricate cranes and crane ropes and other handling equipment. Ideal for use in the metallurgical industry for lubrication, for example, rotary kilns, as well as in the mining industry for the lubrication of aggregates of mining machinery, machines for the processing of coal and minerals, and in the processing of slag (waste).

It is also used for low-rolled bearings working at high temperature.

Compatible with all materials that are not lubricant sensitive.

PROLUBE DARK meets the ISO 9001 standard.

Active Ingredients:

- refined oils

- synthetic polymers

- Extreme pressure and anti-wear additives AW - graphite

ATTENTION: Before using PROLUBE DARK, it is necessary to clean and dry the contact surface, as well as the bearing surface (preferably ZEP solvents), in order to ensure the best contact of the lubricant with the bearing surface.

PROLUBE DARK PL

Belongs to a new generation of lubricants containing thickeners based on the elastomer of polyurea and ashless oil.

Features:

High efficiency: thanks to an innovative basis on the polyurethane elastomer, it provides better lubrication quality than conventional lubricants containing lithium, calcium or aluminum compounds.

High adhesion: It is made on the basis of high viscosity oils (ISO VG 460).

Wide range of operating temperatures: It is stable in the temperature range from -20 ° C to + 180 ° C.

High stability: It is a perfect rust and corrosion inhibitor, and at the same time it is highly resistant to temperature and stable oxidation resistance.

Protects machines and equipment, reduces costs: when regularly used on a permanent basis, increases the periods of inter-service lubrication of mechanisms and units (reducing the cost of lubrication).

Application / method of use

PROLUBE DARK PL is intended for use in bearings that operate at high temperatures, low speed and high load. The main areas of application are: industrial objects (metallurgical plants, paper factories, cement plants, etc.), in particular equipment and machines that operate at high temperatures and in aqueous medium, including fully closed bearings with long-term lubrication (for life of bearings) in industrial and automobile transport.

Apply with the appropriate applicator in the case of a cartridge or brush, if the product is packed in a jar.

PROLUBE DARK meets the ISO 9001 standard.

Active Ingredients:

- refined mineral oils (according to ISO VG 460 standards)

- polyurea

- Extreme pressure additives and antioxidant additives

WARNING: Before using PROLUBE DARK PL, the surfaces must be thoroughly cleaned (ZER solvents are best suited for this purpose) to ensure better contact of the lubricant with the bearing surface. Can be used on metals and materials resistant to mineral oil.

PROLUBE ELECTRIC

Features:

Excellent mechanical properties: besides optimum water-resistance and oxidation resistance, it has excellent adhesion, which makes it possible to obtain a more stable lubricating coating with a higher resistance to water washing.

Protective properties: protects all electrical elements from harmful effects of salts, dirt and corrosion.

Wide application in industry: Due to its high dielectric strength, it is used on joints and connectors, as well as in electrical sockets to prevent wear of components. Reduces the probability of failures and short circuits. Increases the life of electrical equipment.

Application / method of use

PROLUBE ELECTRIC is used in electrical switchboards, automatic switches of AC and DC, connectors, electrical indicators, battery poles; in the field of lighting technology - incandescent lamps; in the automotive industry - joining sockets, wires, etc.

ATTENTION: Before using PROLUBE ELECTRIC, the surface must be thoroughly cleaned, which is why the ZER solvents are best suited to ensure the best possible contact with the surface. Apply to silicones resistant to metals and materials. Not recommended for use in precision bearings.

PROLUBE ELECTRIC meets the ISO 9001 standard.

PROLUBE HS

Features:

Excellent lubricating properties: through its synthetic base and the use of lithium soaps and antioxidant additives, especially suitable for lubrication under extreme environmental conditions, for example at high temperatures and at high speeds.

High resistance to water washing: Due to the high adhesion coefficient, it is effective in humidity and washed out with water.

Compatibility: Compatible with plastics and elastomers.

Protective effect: provides good oxidation protection.

Wide range of operating temperatures: Provides protection over a wide range of temperatures from -60 ° C to + 120 ° C.

Application / method of use

PROLUBE HS is ideally suited for lubricating bearings in equipment used in the manufacture of ceramics, steel, paper and glass, wherever there is a need to lubricate parts, tools and bearings operating in a wide range of temperatures (-60 ° C to +120 ° F). ° C) and at high speeds.

Apply manually or by pneumatic means.

CAUTION: PROLUBE HS can be used on all metal surfaces. It is also compatible with plastics and elastomers, but in this case, it is recommended to conduct tests before the wide application of the product.

PROLUBE HS meets ISO 9001 standard.

PROLUBE MARINE

ProLUBE MARINE is a titanium oxide-based lubricant, known for its high efficiency and very high adhesion, designed specifically for the marine transport industry.

Features:

Very sticky: because of its base (titanium oxide), the product has a high resistance to moisture and adhesion.

Protective: effectively protects components and aggregates from corrosion to which the product is applied.

Maintains a high load: thanks to EP additives, the product is resistant to high load.

Application / method of use

PROLUBE MARINE specially suitable for greasing of moving parts in extremely wet conditions: hinges, gears, gear wheels, lever mechanisms, etc. Due to its properties, it is ideal for the marine industry. The tool is used in all areas that require lubrication in highly wet marine conditions. It is also suitable for grease lubrication in the automotive industry.

Compatible with metal surfaces and other materials that are not sensitive to contact with mineral oils.

Apply to a clean surface using manual lubrication equipment or other appropriate ZEP series device.