WATELEC AERO 

Removes water and moisture from all electrical devices.

Penetrates quickly. Removes moisture, leaves a protective anti-corrosive film. Eliminates short circuits in the distributor cap, high tension leads, plug insulators, battery cables, coil, alternator or generator. Does not gum.

ZEP 2000 NEW AERO

ZEP 2000 is a very stable, dry lubricant with high purification and penetration properties in aerosol form. Ideal for use with high load conditions and strong surface adhesion. A unique combination of natural and synthetic lubricants combined with Tefl on®. Tefl on® is a registered trademark of DuPont Corporation and is used under the ZEP® Manufacturing license.

Features:

Deep penetration: contains solvents that evaporate very quickly. When carefully applied, penetrates deep into the middle of the joints, even in very dense places. Prevents dry start and excessive wear of machinery.

Corrosion inhibitor: forms a layer that does not pass water while working devices, protecting their surfaces from corrosion and rust.

High stability: when applied to the surface forms a long-lasting protective layer, which prevents excessive friction between the lubricating parts. Having the appropriate consistency (dry grease) - does not leak and does not leak even under the influence of high pressures, vibrations, strong shocks and high temperatures.

Water resistance: effective in working with steam, and for devices that operate under water.

Wide range of operating temperatures: forms a very stable lubricating coating that does not lose its properties in a wide temperature range from -20 ° C to + 140 ° C.

Efficiency: after one application, it creates long-term protection and, unlike ordinary grease, eliminates old grease when applied to a new layer.

Application / method of use

This is the ideal tool for lubricating open gear wheels and gears, chains, valves, screws, etc. Suitable for use in construction equipment, air conditioning, cement plants and quarries, drilling equipment, equipment for quarries, mobile drilling rigs, earthwork equipment, metallurgical combines and steel mills, water dispenser devices, metal processing machines, passenger and commodity elevators, typewriters, sawmills and equipment for wood processing, in the textile industry, etc.

ZEP 45 DUAL FORCE

It belongs to the latest generation of products that lubricate and weaken seizures. Occupies first place at the same time in the field of lubrication, protection and unlocking of jammed joints.

Features:

Instantaneous penetration: quickly penetrates, unlocking the jamming of parts and machine elements that result from wear (for example, due to friction), corrosion and accumulation of dirt and grease / grease.

The unique formula of the product: thanks to the content of microparticles, PTFE (polytetrafluoroethylene) has become a multifunctional product of the latest generation which: lubricates, protects against corrosion, protects against wear, penetrates and unblocks seizures.

Protects against wear: thanks to the presence of PTFE increases its power, extending the lifespan of all the mechanical components to which this product is used. This reduces the number of repairs and, accordingly, the funds allocated for keeping the mechanisms in proper condition.

Does not contain silicone: it does not contain silicone, so it can be used in places where it is not possible to use products with silicone content, for example, in areas related to painting or lacquering.

Very Low VOC (volatile organic compounds) content: developed in accordance with the latest European Volatile Organic Compounds (VOC) regulations, so it is currently one of the safest products in this category on the market.

Almost odorless: Tests have shown that this product is characterized by a minimal odor among other products of the same category.

Application / method of use

ZEP 45 DUAL FORCE is recommended for use in all assembly and dismantling works for equipment and machinery at enterprises, in car workshops. Increases the speed and efficiency of the installation and protects against further corrosion.

Before use, the balloon should be shaken, and then choose the method of necessary spraying. You can use direct spray from the cylinder or apply an extension tube for ease of use or access to hard-to-reach places. Spraying should be carried out at a distance of approximately 20 cm from the surface. On surfaces with strong corrosion, first apply the product, then clean the rust with a brush, and then apply the tool again for long-term protection.

ATTENTION: The product can be applied to all types of steel. In case of application on plastic surfaces it is necessary to first test the means on the invisible site. Store at temperatures between + 5 ° C and + 30 ° C. Fluctuations in ambient temperatures can affect product performance.

Contains only 15% volatile organic compounds (VOCs). This percentage is significantly lower than the limits set in the current European regulations on the presence of volatile organic compounds in chemical products.

Sealer for porous surfaces. Polymeric dispersion for sealing porous surfaces.