ZEP
AQUABAT
AQUABAT
Water-soluble impregnation.
Features:
- Prevents pollution, mold and moss, rain, wind and frost.
- Protects walls from moisture and prevents plaster peeling.
- Non-harmful, non-toxic, solvent-free: reducing environmental impact.
- Wood products can be cleaned and then painted as usual.
- Walls become less moist, which means better thermal insulation and less heating costs.
- Ready to use: no need for dilution.
| CHEMICAL AND PHYSICAL PROPERTIES | |
| Form | white liquid |
| Smell | typical |
| Density at 20 ° C | ± 0.99 g / cm³ |
| Expiration date | 6 months in sealed packaging |
AQUABAT Water-soluble impregnation.Features:- Prevents pollution, mold and moss, rain, wind and..
BATTERY CARE NEW AERO
BATTERY CARE NEW AERO
It is a device that cleanses and protects against corrosion, has the ability to detect leakage of acids and is intended for terminals (terminals) of storage batteries and whole battery systems (aerosol).
Features:
Quick-acting: works instantly.
Strong cleaning: effectively cleans and removes dirt and fats, such as lubricants and oils.
Anticorrosive: dissolves and removes corrosion while protecting it from it; Delays future corrosion processes (creates anti-corrosion protective film).
Neutralizes acids: it has components that neutralize the acid leakage in the battery.
Continues battery life: prevents unused battery life and maintains effective contact between battery terminals and electrical cable terminals.
It has an indicator of battery acid leakage: changing the color from yellow to red indicates areas where there is acid flow and where acid residues need to be removed.
Does not damage the surface: it is safe with respect to most materials from which batteries are made, such as: battery cables, rubber sheaths or artificial materials (plastics).
Easy to apply: spray enough to remove unwanted contaminants, and then rinse with water.
Application / method of use
Before use, shake strongly, then spray on the clips and terminals of the batteries and on the battery cables, as well as on those surfaces where corrosion and acid traces may occur. Then you need to wait from 3 to 5 minutes. If there is leakage of acid, then the BATTERY CARE foam, which was yellow, will change its color to red. In the end it is necessary to wipe with a dry cloth or to rinse dirt and corrosion with water.
BATTERY CARE is great for use on all rechargeable batteries: cars, trucks, motorcycles, aviation and marine batteries, tractors, tractors, loaders, as well as generators.
BATTERY CARE NEW AEROIt is a device that cleanses and protects against corrosion, has the ability to..
BELT GRIP
BELT GRIP
Anti-skid for all types of belts.
BELT GRIP penetrates the drive belts and makes them soft and supple, which prevents cracks and burrs.
Features:
Anti-slip: Makes the straps soft and supple, preventing slipping.
Restores: Belts are updated for long periods of time.
Cleans: Has a powerful cleansing action that dissolves fat and oil deposits on the straps.
Waterproofing: BELT GRIP is also effective in contact with water.
| CHEMICAL AND PHYSICAL PROPERTIES | |
| Form | aerosol |
| Color | colorless |
| Smell | acetone |
| Auto-ignition temperature | 365°C |
| Specific gravity (20 ° C) | 0.58 kg / dm3 |
| Miscibility in water | insoluble |
| VOC (%) | 86,40% |
BELT GRIP Anti-skid for all types of belts.BELT GRIP penetrates the drive belts and makes them ..
BETOLUB W
BETOLUB W
Liquid protective agent-separator (separator).
BETOLUB W is a protective agent in the form of a liquid, the task of which is to facilitate the separation of surfaces from the adhesion of concrete, cement, asphalt and similar materials.
| CHEMICAL AND PHYSICAL PROPERTIES | |
| Form | liquid |
| Color | light brown |
| Smell | nice, easy |
| Flash point | > +100°C |
| Density at + 15 ° C | 900 kg / m³ |
| Freezing point | –15°C |
| Viscosity at + 40 ° C | 15 mm² / s |
BETOLUB W Liquid protective agent-separator (separator).BETOLUB W is a protective agent i..
BETOPLUS
BETOPLUS
Liquid chloride additive used to reduce the cure time of cement mixtures.
Features:
Promotes hardening and hardening of concrete even at low temperatures or in case of freezing risk.
The product is chlorine-free and can be used for both reinforced and non-reinforced concrete.
Betoplus efficiency can significantly increase finished product production.
It acts as a catalyst in the initial reaction of cement hydration, especially at low temperatures.
It also has plasticizing properties and limited air bubble formation.
Allows to reduce the amount of mixing water by 10-15%.
It results in a creamy and more technological consistency.
Protects concrete and mortar up to -8 ° C.
| CHEMICAL AND PHYSICAL PROPERTIES | |
| Form | transparent liquid |
| Density at 20 ° C | 1,42 kg / l |
| рН | from 5 to 7.5 |
| Freezing point | <- 10 ° C |
| Dry extract | 56% |
| Chlorine content | <0,1% |
| The value of NA2O | <3% |
BETOPLUS Liquid chloride additive used to reduce the cure time of cement mixtures.Features:Prom..
BETORETARD
BETORETARD
Liquid additive to increase the time of use of concrete and mortar.
Features:
A liquid additive for concrete and mortar, the main function of which is to increase the cure time.
It is ideally suited for long-distance transport, for the preparation of large quantities of long-time solutions.
Betoretard delays the cure of concrete in proportion to the dose used and improves mechanical performance.
Betoretard improves plasticity and manageability while reducing cracks.
| CHEMICAL AND PHYSICAL PROPERTIES | |
| Form | fluorescent yellow liquid |
| Density at 20 ° C | 1.05 g / cm³ |
| рН | 6-8 |
BETORETARD Liquid additive to increase the time of use of concrete and mortar.Features:A liquid..